Uni-Ram Parts Cleaner with Automatic
Solvent Recycling
New! KleenGIANT34SL Series
Parts Cleaner with Automatic Solvent Recycling
34SL-37 (37" Wide Sink)
Optional Filters Available
34SL-42 (42" Wide Sink)
Shown with Optional Filters
Parts are cleaned in the rugged stainless steel sink using the Flow-Thru Brush and Flexible Spigot. The Built-in Solvent Recycler provides a supply of clean solvent.
Built-in Solvent Recycler
•
Clean solvent is available on demand. With a press of the button, clean solvent is available in about 60 seconds.
•
The unit produces up to 20 gallons of clean solvent per day (4 batches at 5 gallons per batch).
•
The recycler unit may be started by the press of a button or on an automatic scheduled start.
•
Waste Sludge is automatically discharged into a waste container.
•
Dramatic saving in solvent purchases and disposal costs.
SystemOne: The Industry’s Most Powerful Parts Cleaning Technology
Significantly Reduces
Operational Costs
Recovers 100% of
Cleaning Solvents
Eliminates Hazardous
Solvent Waste
Potentially Reduces
Generator Status
Why operators prefer clean solvent:
Clean solvent cleans better
Clean solvent cleans faster
Clean solvent leaves less oily residue
Clean solvent saves time and money
MODEL 501
MODEL 571
MODEL 110
General Description
On-site Recycling Parts Washer - Standard Sink
On-site Recycling Parts Washer
- Large Sink
Portable Non-recycling Parts
Washer with Adjustable Height
Overall Dimensions
68”h x 32”w x 27”d
70”h x 39”w x 29”d
58”-72”h x 33”w x 21”d
Working Area (w x d)
32” x 27”
39” x 29”
26.5” x 17”
Working Height
34”
34”
33”-47” Adjustable
Operation
Push buttons: On/Off, Recycle
Push buttons: On/Off, Recycle
Push buttons: On/Off
Solvent Capacity
20 gallons
20 gallons
1 gallon
Typical Recycle Time
4 hours
4 hours
N/A
Power Requirements
115 VAC, 11.9 Amps, 60 Hz
115 VAC, 11.9 Amps, 60 Hz
115 VAC, 1 Amp, 60 Hz
Weight
326 lbs
342 lbs
142 lbs
Construction
Heavy gauge steel throughout
Heavy gauge steel throughout
Heavy gauge steel throughout
Safety Features
Fuse protection
Dual temperature sensor
Fusable link
Fuse protection
Dual temperature sensor
Fusable link
Fuse protection
Fusable link
Available Options
Temperature sensitive decal
Vapor removal hood with light
Temperature sensitive decal
Vapor removal hood with light
N/A
How the SystemOne Micro-Refinery Works
TRANSFER PROCESS (4 minutes)
1. DIRTY SOLVENT FLUSHED INTO THE DISTILLATION CHAMBER.
2. CLEAN SOLVENT TRANSFERRED INTO WASH BASIN AND AVAILABLE FOR IMMEDIATE USE.
RECYCLE PROCESS (4 hours)
3. DIRTY SOLVENT HEATED UNDER VACUUM TO VAPOR POINT.
4. SOLVENT VAPORIZED.
5. OILY RESIDUE SEPARATED FROM VAPORIZED SOLVENT FOR PERIODIC REMOVAL.
6. SOLVENT VAPORS COOLED BACK TO LIQUID STATE IN CONDENSER.
7. 100% PURE SOLVENT RETURNED TO RESERVOIR AND AVAILABLE FOR CONTINUED USE.
Combination Spray Gun Cleaning With Automatic Solvent Recycling:
LIQUID WASTE, CONTINUOUS AUTO REPEAT PROCESSING
The waste in the dirty solution must be a liquid like oil or the solution must have a low percentage of solid waste as the waste passes through a drain from the distillation tank to a waste container.
With slightly more solid waste the DC100 series can operate with a bag in the distillation tank.
DC100N, DC100G, DC10X2
SPEED
UP TO 9 GAL/HR (35L/HR)
VOLTAGE
240 VAC
HEATER
5000 W EXPLOSION-PROOF, SEALED HEATER
DIMENSIONS
47 X 27 X 48" (WDH)
DC100N
BASE MODEL
DC100G
WATER SEPARATOR FOR PRINT INDUSTRY
DC10X2
SPECIAL APPLICATION, SEE BELOW
When the dirty solvent solution contains two solvents that differ significantly in boiling point., the DC10X2 can output the solvents into separate drums.
AC10NL, AC10PL, AC10NH, AC10PH, AC10NLPW
SPEED
UP TO 2.5 GAL/HR (10L/HR)
VOLTAGE
L-MODELS - 120, H-MODELS - 240
HEATER
1500 W
DIMENSIONS
12 X 25.5 X 55" (WDH)
AC10NL
BASE MODEL,120V
AC10PL
PUMP VACUUM
AC10NH
BASE MODEL, 240V
AC10PH
PUMP VACUUM
AC10NLPW
SPECIAL APPLICATION, SEE BELOW
Use the portable AC10NLPW to recycle dirty solvent from multiple Parts Washers. Transfer 10 gallons of dirty solvent to the AC10NLPW and transfer previously recycled clean solvent to the Parts Washer. Recycle and push the AC10NLPW to the next Parts Washer. For use with Uni-ram Parts Washer UMW20EG or with other Parts Washers.
AUTOMOTIVE SPRAY GUN CLEANERS - WATER BORNE PAINTS
ALL-STAINLESS STEEL MODEL Wash spray guns with the Flow-through Brush using Recirculating Water from the container in the cabinet or use fresh water from the building supply. Clean the paint channels of the spray gun using the Wash Gun with fresh water from the container or fresh water from the building supply. Cleaning takes place on the convenient work surface inside the hood.
